Concept of Heat Recovery from Exhaust Gases

World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium - WMCAUS

土木建筑工程

Bukowska, Maria^1 ; Nowak, Krzysztof^1 ; Proszak-Misik, Danuta^1 ; Rabczak, Slawomir^1

Rzeszow University of Technology, al. Powstaców Warszawy 12, Rzeszów

35-959, Poland^1

关键词: Combustion pro-cess;    Energy effects;    Exhaust gas temperatures;    Exhaust temperature;    Load variations;    Operating condition;    Operational flexibility;    Overall efficiency;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/245/5/052057/pdf
DOI  :  10.1088/1757-899X/245/5/052057

学科分类：土木及结构工程学

来源: IOP

【 摘 要 】

The theme of the article is to determine the possibility of waste heat recovery and use it to prepare hot water. The scope includes a description of the existing sample of coal-fired boiler plant, the analysis of working condition and heat recovery proposals. For this purpose, a series of calculations necessary to identify the energy effect of exhaust temperature decreasing and transferring recovery heat to hot water processing. Heat recover solutions from the exhaust gases channel between boiler and chimney section were proposed. Estimation for the cost-effectiveness of such a solution was made. All calculations and analysis were performed for typical Polish conditions, for coal-fired boiler plant. Typicality of this solution is manifested by the volatility of the load during the year, due to distribution of heat for heating and hot water, determining the load variation during the day. Analysed system of three boilers in case of load variation allows to operational flexibility and adaptation of the boilers load to the current heat demand. This adaptation requires changes in the operating conditions of boilers and in particular assurance of properly conditions for the combustion of fuel. These conditions have an impact on the existing thermal loss and the overall efficiency of the boiler plant. On the boiler plant efficiency affects particularly exhaust gas temperature and the excess air factor. Increasing the efficiency of boilers plant is possible to reach by following actions: limiting the excess air factor in coal combustion process in boilers and using an additional heat exchanger in the exhaust gas channel outside of boilers (economizer) intended to preheat the hot water.