Influence of Loads That Are Not Contemplated In the Structure Calculation Process

World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium - WMCAUS

土木建筑工程

Carrillo, Francisco Gil^1 ; Mas-Guindal, Antonio José^2

Department of Architectural Construction, Polytechnic University of Madrid, Street Federico Carlos Sainz de Robles n° 11, 6°A, Madrid

28035, Spain^1

Department of Building Technology, Polytechnic University of Madrid, Ave. Juan de Herrera 6, Madrid

28040, Spain^2

关键词: Execution phase;    Structure calculation;    Useful life;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/245/3/032097/pdf
DOI  :  10.1088/1757-899X/245/3/032097

学科分类：土木及结构工程学

来源: IOP

【 摘 要 】

The approach to the calculation of the structure of a building, apart from the geometry and its peculiarities always in the first instance, the first approach is to analyze the state of loads, according to current legislation CTE, to which the building will be subjected and In their respective plants and areas, these loads are defined in any of the regulations in force at the moment in Spain and almost all the professionals of the sector known for their application. In addition to the loads described above, there are others that intervene in the building, although they are evident only during the execution phase of the building, those loads that are forgotten and not taken into account, nor even the existing mandatory regulations CTE, EHE-08, in that first approach of load state for the calculation of the structure of the building, are there and have their direct consequences on the structure, ultimately on the useful life of the structure and the interaction with The rest of the elements that make up the building can cause instantaneous pathologies, medium and long term in the structures and consequently in the rest of the building with the effects derived from them.