Impact of Air Entraining Method on the Resistance of Concrete to Internal Cracking

World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium - WMCAUS

土木建筑工程

Wawrzeczyk, Jerzy^1 ; Molendowska, Agnieszka^1

Kielce University of Technology, Al. Tysiclecia Pastwa Polskiego 7, Kielce

25-314, Poland^1

关键词: Air entraining admixtures;    Air entraining agents;    Air-entrained concrete;    Conventional methods;    Freeze-thaw durability;    Freeze-thaw resistance;    Freezing and thawing;    Polymer microspheres;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/245/2/022012/pdf
DOI  :  10.1088/1757-899X/245/2/022012

学科分类：土木及结构工程学

来源: IOP

【 摘 要 】

This paper presents the test results of air entrained concrete mixtures made at a constant W/C ratio of 0.44. Three different air entraining agents were used: polymer microspheres, glass microspheres and a conventional air entraining admixture. The aim of this study was to compare the effectiveness of the air entraining methods. Concrete mixture tests were performed for consistency (slump test), density and, in the case of AEA series, air content by pressure method. Hardened concrete tests were performed for compressive strength, water absorption, resistance to chloride ingress, and freeze-thaw durability - resistance to internal cracking tests were conducted in accordance with PN-88/B-06250 on cube specimens and with the modified ASTM C666 A test method on beam specimens; porosity characteristics (A, A300, ) were determined to PN-EN 480-11:1998. No significant mass and length changes were recorded for the concrete air entrained with the conventional methods or with polymer microspheres. The results indicate that polymer microspheres are a very good alternative to traditional air entraining methods for concrete, providing effective air entrainment and protection from freezing and thawing. The glass microsphere-based concretes showed insufficient freeze-thaw resistance. The test results indicate that both the conventional methods (AEA) and the air entrainment by polymer microspheres are effective air entraining methods. It has to be noted that in the case of the use of polymer microspheres, a comparable value of and a very good freeze-thaw resistance can be achieved at a noticeably lower air and micropore contents and at lower strength loss.