Operational Design of Magnetostrictive Inkjet PrintHead

5th Asia Conference on Mechanical and Materials Engineering

机械制造;材料科学

Park, Young-Woo^1

Department of Mechatronics Engineering, Chungnam National University, Daejeon

34134, Korea, Republic of^1

关键词: Back pressures;    Droplet sizes;    Operating frequency;    Operational design;    Print head;    Syringe pumps;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/241/1/012024/pdf
DOI  :  10.1088/1757-899X/241/1/012024

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

This paper presents the redesign of the first magnetostrictive inkjet printhead (MagJet). The redesign includes the structural redesign and operational redesign. After completing the process successfully, the redesigned MagJet is subjected to testing. The effect of backpressure from a commercial syringe pump is evident. The operating frequency with backpressure reaches up to 1.5 kHz, although that without backpressure is 650 Hz. The droplet size at a frequency of 800 Hz is about 53 μm, less than half of the nozzle size. It can be concluded that various droplets can be made by combining frequency with a proper flow rate. Backpressure prevents the MagJet from air inclusion in the nozzle, so continuous ejection of the droplets are possible.