Mesh three-dimensional arm orthosis with built-in ultrasound physiotherapy system

International Scientific-technical Conference on Innovative Engineering Technologies, Equipment and Materials 2016

工业技术;机械制造;材料科学

Kashapova, R.M.^1 ; Kashapov, R.N.^1 ; Kashapova, R.S.^1

Kazan Federal University, 18 Kremlyovskaya street, Kazan

420008, Russia^1

关键词: Healing process;    Nylon 12;    Orthosis;    Selective laser sintering;    Three-dimensional scanning;    Ultrasound exposure;    Virtual modeling;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/240/1/012036/pdf
DOI  :  10.1088/1757-899X/240/1/012036

来源: IOP

【 摘 要 】

The possibility of using the built-in ultrasound physiotherapy system of the hand orthosis is explored in the work. The individual mesh orthosis from nylon 12 was manufactured by the 3D prototyping method on the installation of selective laser sintering SLS SPro 60HD. The applied technology of three-dimensional scanning made it possible to obtain a model of the patient's hand and on the basis of it to build a virtual model of the mesh frame. In the course of the research, the developed system of ultrasound exposure was installed on the orthosis and its tests were carried out. As a result, the acceleration of the healing process and the reduction in the time of wearing orthosis were found.