Application of reverse engineering in the medical industry.

International Scientific-technical Conference on Innovative Engineering Technologies, Equipment and Materials 2016

工业技术;机械制造;材料科学

Kaleev, A.A.^1 ; Kashapov, L.N.^1 ; Kashapov, N.F.^1 ; Kashapov, R.N.^1,2,3

Kazan Federal University, 18 Kremlyovskaya street, Kazan

420008, Russia^1

Laboratory of Radiation Physics, Kazan Physical-Technical Institute, Kazan Scientific Center, Russian Academy of Sciences, Kazan

420029, Russia^2

Kazan State Medical University, Kazan

420012, Russia^3

关键词: 3-D printing;    Geomagic studios;    Laser stereolithography;    Medical industries;    Parametric modeling;    Reverse engineering techniques;    Three-dimensional scanning;    Virtual modeling;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/240/1/012030/pdf
DOI  :  10.1088/1757-899X/240/1/012030

来源: IOP

【 摘 要 】

The purpose of this research is to develop on the basis of existing analogs new design of ophthalmologic microsurgical tweezers by using reverse engineering techniques. Virtual model was obtained by using a three-dimensional scanning system Solutionix Rexcan 450 MP. Geomagic Studio program was used to remove defects and inaccuracies of the obtained parametric model. A prototype of the finished model was made on the installation of laser stereolithography Projet 6000. Total time of the creation was 16 hours from the reverse engineering procedure to 3D-printing of the prototype.