The analysis of effect of heat treatment temperature on micro structure, crystal structure and hardness material on alloy Zr 96,2 Sn 2,3Nb1.1 Fe0,4

1st Nommensen International Conference on Technology and Engineering

Saing, Bungaran^1 ; Budiarto, B.^2

Chemical Engineering, Faculty of Engineering, University of Bhayangkara, Jakarta, Indonesia^1

Mechanical Engineering, Faculty of Engineering, Christian University of Indonesia, Jakarta, Indonesia^2

关键词: Crystal formation;    Crystalline characteristic;    Effect of heat treatments;    Fuel cladding;    Homogenization process;    Vickers;    X ray diffractometers;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/237/1/012043/pdf
DOI  :  10.1088/1757-899X/237/1/012043

来源: IOP

【 摘 要 】

The effect of heat treatment temperature (in 5000C, 6000C, and 7000C) from Zr96,2Sn2,3Nb1.1Fe0,4as fuel cladding material candidate's reactor nuclear power plant; for microstructure, crystal structure, and hardness has been carried out. Several characteristic was conducted by using an optical microscope, x-ray diffractometer and Vickers method. The result showed the crystalline characteristic peaks by a tendency to a single crystal formation and microstructure is getting better with less precipitation and the hardness of the alloy is 329.6 4.5 HVN after the homogenization process.