Design of pneumatic proportional flow valve type 5/3

15th International Scientific and Engineering Conference Hermetic Sealing, Vibration Reliability and Ecological Safety of Pump and Compressor Machinery HERVICON+PUMPS-2017

机械制造;生态环境科学

Laski, P.A.^1 ; Pietrala, D.S.^1 ; Zwierzchowski, J.^1 ; Czarnogorski, K.^1

Department of Automation and Robotics, Faculty of Mechatronics and Machine Design, Aleja Tysiaclecia Panstwa Polskiego 7, Kielce

25-314, Poland^1

关键词: ATmega16;    AVR microcontrollers;    Flow valves;    Linear stepper motors;    Simulation research;    SolidWorks;    Valve characteristics;    Virtual modeling;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/233/1/012029/pdf
DOI  :  10.1088/1757-899X/233/1/012029

学科分类：环境科学（综合）

来源: IOP

【 摘 要 】

In this paper the 5/3-way pneumatic, proportional flow valve was designed and made. Stepper linear actuator was used to move the spool. The valve is controlled by the controlled based on a AVR microcontroller. Virtual model of the valve was created in CAD. The real element was made based on a standard 5/3-way manually actuated valve with hand lever, which was dismounted and replaced by linear stepper motor. All the elements was mounted in a specially made housing. The controller consists of microcontroller Atmega16, integrated circuit L293D, display, two potentiometers, three LEDs and six buttons. Series of research was also conducted. Simulation research were performed using CFD by the Flow Simulation addition to SolidWorks. During the experiments the valve characteristics of flow and pressure was determined.