CFD simulation of a screw compressor with oil injection

10th International Conference on Compressors and their Systems

Ding, Hui^1 ; Jiang, Yu^1

Simerics Inc., 1750 112th Ave NE Ste C250, Bellevue

WA

98004, United States^1

关键词: CFD modeling;    CFD simulations;    Compression system;    Oil injection;    Screw compressors;    Sealing effect;    Test case;    Twin screw;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/232/1/012020/pdf
DOI  :  10.1088/1757-899X/232/1/012020

来源: IOP

【 摘 要 】

In this paper, a full 3D transient CFD model of a twin screw compressor with oil injection will be described in detail. The Volume Of Fraction (VOF) approach was used for two phase flow of gas and liquid. The numeric method and simulation conditions will be explained. Simulation results will be presented with discussion. The cooling and sealing effects of oil injection will be evaluated by comparing the simulation results for the cases with and without oil. The imbalance of mass and energy of the compression system in simulation results will be rigorously checked to prove the methodologies used in the simulation are fully conservative and consistent. The efficiency, speed, and robustness of the proposed approach will also be demonstrated through the test case.