Theoretical investigation of flash vaporisation in a screw expander

10th International Conference on Compressors and their Systems

Vasuthevan, Hanushan^1 ; Brümmer, Andreas^1

TU Dortmund University, Department of Fluidics, Leonhard-Euler-Str. 5, Dortmund

44227, Germany^1

关键词: Liquid injections;    Meta-stable state;    Pressure increase;    Saturation pressure;    Theoretical investigations;    Thermodynamic equilibria;    Thermodynamic simulations;    Two phase mixtures;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/232/1/012077/pdf
DOI  :  10.1088/1757-899X/232/1/012077

来源: IOP

【 摘 要 】

In the present study flash vaporisation of liquid injection in a twin screw expander for a Trilateral Flash Cycle (TFC) is examined theoretically. The TFC process comprises a pressure increase in the working fluid, followed by heating the liquid close to boiling point. The hot liquid is injected into the working chamber of a screw expander. During this process the pressure of the liquid drops below the saturation pressure, while the temperature of the liquid remains virtually constant. Hence the liquid is superheated and in a metastable state. The liquid jet seeks to achieve a stable state in thermodynamic equilibrium and is therefore partially vaporised. This effect is referred to as flash vaporisation. Accordingly, a two-phase mixture, consisting of vapour and liquid, exists in the working chamber. Thermodynamic simulations were carried out using water as the working fluid for representative screw expander geometry. The simulations presented are performed from two different aspects during the filling process of a screw expander. The first case is the vaporisation of the injected liquid in a state of thermodynamic equilibrium, whereby the two-phase mixture is treated entirely as a compressible and homogeneous gas. The second case considers flashing efficiency. It describes the quantity of flashed vapour and consists of a liquid and vapour domain. Both models are compared and analysed with respect to the operational behaviour of a screw expander.