Programming and machining of complex parts based on CATIA solid modeling

2017 2nd International Seminar on Advances in Materials Science and Engineering

Zhu, Xiurong^1

Jilin Teacher's Institute of Engineering and Technology, Changchun Jilin

130052, China^1

关键词: 6061 aluminum alloys;    Cnc machining;    Complex parts;    Design process;    Machining Process;    Processing technologies;    Simulation process;    Simulation processing;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/231/1/012081/pdf
DOI  :  10.1088/1757-899X/231/1/012081

来源: IOP

【 摘 要 】

The complex parts of the use of CATIA solid modeling programming and simulation processing design, elaborated in the field of CNC machining, programming and the importance of processing technology. In parts of the design process, first make a deep analysis on the principle, and then the size of the design, the size of each chain, connected to each other. After the use of backstepping and a variety of methods to calculate the final size of the parts. In the selection of parts materials, careful study, repeated testing, the final choice of 6061 aluminum alloy. According to the actual situation of the processing site, it is necessary to make a comprehensive consideration of various factors in the machining process. The simulation process should be based on the actual processing, not only pay attention to shape. It can be used as reference for machining.