Research on a lubricating grease print process for cylindrical cylinder

2017 2nd International Seminar on Advances in Materials Science and Engineering

Yang, Liu^1 ; Zhang, Xuan^1 ; Wang, Xianyan^1 ; Tan, Xiaoyan^1

SORL Auto Parts Inc., Wenzhou

325200, China^1

关键词: Cylindrical components;    Economic benefits;    Lubricating performance;    Manual operations;    Reciprocating motion;    Rubber sealing parts;    Vehicle braking;    Working methods;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/231/1/012151/pdf
DOI  :  10.1088/1757-899X/231/1/012151

来源: IOP

【 摘 要 】

In vehicle braking system and clutch system of transmission, there is always a kind of cylindrical component dose reciprocating motion. The main working method is the reciprocating motion between the rubber sealing parts and cylindrical parts, the main factor affects the service life of the product is the lubricating performance of the moving parts. So the lubricating performance between cylinders and rubber sealing rings is particularly important, same as the quality of the grease applies on the surface of the surface of cylinder. Traditional method of manually applying grease has some defects such as applying unevenly, applying tools like brush and cloth easily falls off and affect the cleanness of products, contact skin easily cause allergy, waste grease due to the uncontrollable of grease quantity using in applying, low efficiency of manual operation. An automatic, quantitative and high pressure applying equipment is introduced in this document to replace the traditional manually applying method, which can guarantee the applying quality of the grease which are painted on the surface of cylinder and bring economic benefits to the company.