Remote control of the industry processes. POWERLINK protocol application

5th ModTech International Conference - Modern Technologies in Industrial Engineering

Wóbel, A.^1 ; Paruzel, D.^1 ; Paszkiewicz, B.^1

Silesian University of Technology, Faculty of Mechanical Engineering, Konarskiego 18a Street, Gliwice

44-100, Poland^1

关键词: Individual components;    Industry process;    Internal network;    Measurement data;    Pc industries;    Production cycle;    Recording process;    Technological development;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/227/1/012136/pdf
DOI  :  10.1088/1757-899X/227/1/012136

来源: IOP

【 摘 要 】

The present technological development enables the use of solutions characterized by a lower failure rate, and work with greater precision. This allows you to obtain the most efficient production, high speed production and reliability of individual components. The main scope of this article was POWERLINK protocol application for communication with the controller B & R through communication Ethernet for recording process parameters. This enables control of run production cycle using an internal network connected to the PC industry. Knowledge of the most important parameters of the production in real time allows detecting of a failure immediately after occurrence. For this purpose, the position of diagnostic use driver X20CP1301 B&R to record measurement data such as pressure, temperature valve between the parties and the torque required to change the valve setting was made. The use of POWERLINK protocol allows for the transmission of information on the status of every 200 μs.