Modelling cooperation of industrial robots as multi-agent systems

5th ModTech International Conference - Modern Technologies in Industrial Engineering

Hryniewicz, P.^1 ; Banas, W.^1 ; Foit, K.^1 ; Gwiazda, A.^1 ; Sekala, A.^1

Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Konarskiego 18A, Gliwice

44-100, Poland^1

关键词: Common spaces;    Dual-arm robot;    Robot movements;    Robotic cell;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/227/1/012061/pdf
DOI  :  10.1088/1757-899X/227/1/012061

来源: IOP

【 摘 要 】

Nowadays, more and more often in a cell is more than one robot, there is also a dual arm robots, because of this cooperation of two robots in the same space becomes more and more important. Programming robotic cell consisting of two or more robots are currently performed separately for each element of the robot and the cell. It is performed only synchronization programs, but no robot movements. In such situations often placed industrial robots so they do not have common space so the robots are operated separately. When industrial robots are a common space this space can occupy only one robot the other one must be outside the common space. It is very difficult to find applications where two robots are in the same workspace. It was tested but one robot did not do of movement when moving the second and waited for permission to move from the second when it sent a permit - stop the move. Such programs are very difficult and require a lot of experience from the programmer and must be tested separately at the beginning and then very slowly under control. Ideally, the operator takes care of exactly one robot during the test and it is very important to take special care.