Modelling of teeth of a gear transmission for modern manufacturing technologies

5th ModTech International Conference - Modern Technologies in Industrial Engineering

Monica, Z.^1 ; Bana, W.^1 ; wikla, G.^1 ; Topolska, S.^2

Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Konarskiego 18A, Gliwice

44-100, Poland^1

Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Materials and Biomaterials, Konarskiego 18A, 44-100, Poland^2

关键词: Conventional millings;    Conventional processing;    Heat treatment parameters;    Manufacturing technologies;    Parameters selection;    Roughing and finishing;    Technological process;    Technological tools;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/227/1/012080/pdf
DOI  :  10.1088/1757-899X/227/1/012080

来源: IOP

【 摘 要 】

The technological process of manufacturing of gear wheels is influenced by many factors. It is designated depending on the type of material from which the gear is to be produced, its heat treatment parameters, the required accuracy, the geometrical form and the modifications of the tooth. Therefor the parameters selection process is not easy and moreover it is unambiguous. Another important stage of the technological process is the selection of appropriate tools to properly machine teeth in the operations of both roughing and finishing. In the presented work the focus is put first of all on modern production methods of gears using technologically advanced instruments in comparison with conventional tools. Conventional processing tools such as gear hobbing cutters or Fellows gear-shaper cutters are used from the beginning of the machines for the production of gear wheels. With the development of technology and the creation of CNC machines designated for machining of gears wheel it was also developed the manufacturing technology as well as the design knowledge concerning the technological tools. Leading manufacturers of cutting tools extended the range of tools designated for machining of gears on the so-called hobbing cutters with inserted cemented carbide tips. The same have be introduced to Fellows gear-shaper cutters. The results of tests show that is advantaged to use hobbing cutters with inserted cemented carbide tips for milling gear wheels with a high number of teeth, where the time gains are very high, in relation to the use of conventional milling cutters.