The influence of computer-generated path on the robot's effector stability of motion

5th ModTech International Conference - Modern Technologies in Industrial Engineering

Foit, K.^1 ; Bana, W.^1 ; Gwiazda, A.^1 ; wikla, G.^1

Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Konarskiego 18A, Gliwice

44-100, Poland^1

关键词: Acceleration and deceleration;    Computer generated;    Critical configurations;    Off line programming;    Production process;    Simulation software;    Stability of motions;    Trajectory Planning;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/227/1/012045/pdf
DOI  :  10.1088/1757-899X/227/1/012045

来源: IOP

【 摘 要 】

The off-line trajectory planning is often carried out due to economical and practical reasons: the robot is not excluded from the production process and the operator could benefit from testing programs in the virtual environment. On the other hand, the dedicated off-line programming and simulation software is often limited in features and is intended to roughly check the program. It should be expected that the arm of the real robot's manipulator will realize the trajectory in different manner: the acceleration and deceleration phases may trigger the vibrations of the kinematic chain that could affect the precision of effector positioning and degrade the quality of process realized by the robot. The purpose of this work is the analysis of the selected cases, when the robot's effector has been moved along the programmed path. The off-line generated, test trajectories have different arrangement of points: such approach has allowed evaluating the time needed to complete the each of the tasks, as well as measuring the level of the vibration of the robot's wrist. All tests were performed without the load. The conclusions of the experiment may be useful during the trajectory planning in order to avoid the critical configuration of points.