Aspects regarding the correlation between the physical-mechanical and tribological characteristics of composites materials reinforced with carbon fibers

5th ModTech International Conference - Modern Technologies in Industrial Engineering

Caliman, R.^1

Vasile Alecsandri University of Bacau, Calea Marasesti 157, Romania^1

关键词: Coefficient of frictions;    Composites material;    Development and testing;    Sintering durations;    Sintering temperatures;    Technological parameters;    Tribological characteristics;    Tribological tests;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/227/1/012020/pdf
DOI  :  10.1088/1757-899X/227/1/012020

来源: IOP

【 摘 要 】

The purpose of this paper is to highlight a number of factors that influence the physical-mechanical and tribological characteristics of sintered composite materials. Such factors are grouped generally in two categories: technological parameters (pressure compacting, sintering temperature, sintering duration, heat treatment) and the receipt of sintered composite materials. In this paper is presented a program of experiments developed both in composite materials sintered polymer matrix (non-metallic) and in the metal matrix (eg., Al) which was prepared in advance a methodology original production and research for this particular type of materials. The experiments have focused development and testing of a number of 14 polymer composite and 5 composite sintered Al base, in both situations armed with carbon fiber in various forms. Tribological tests followed the establishment of the coefficient of friction and wear rate of the sliding speed at the constant values (v = 7.2 mm/s) and the normal load (N = 8 daN) and for different orientations of the fibers to the direction of sliding: normal (N type), parallel (P) and antiparallel-perpendicular (AP type).