The analysis of energy consumption of the transport and manipulation process of Fanuc AM100iB robot

5th ModTech International Conference - Modern Technologies in Industrial Engineering

Cholewa, A.^1 ; wider, J.^1 ; Zbilski, A.^2

Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Konarskiego 18A, Gliwice

44-100, Poland^1

DRAXLMAIER Group, Engineering Department, Wincentego Pola 21, Gliwice

44-100, Poland^2

关键词: Angular positions;    Electrical current;    Material factor;    Partial decomposition;    Three phasis;    Total energy consumption;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/227/1/012024/pdf
DOI  :  10.1088/1757-899X/227/1/012024

来源: IOP

【 摘 要 】

This article describes test results of energy consumption of Fanuc ArcMate 100iB robot during realization of the transport and manipulation process. The energy consumption test involved the acquisition of values of angular positions of the robot's encoder shafts and values of tensions and expansions of the electrical currents in three phases of each engine. Based on the simulation results, the analysis of energy consumption was carried out, which specified the tested palletizing process using the set of complete and partial decompositions of the energy consumption of all these factors, which in significant degree impacted the amount of energy taken during the process. Quality of the data provided by the analysis of energy consumption was assessed through validation of results, which involved direct comparison of corresponding parameters, which values were measured and calculated. With regards to the developed analysis of energy consumption, computerized techniques were used to determine the impact of all material factors on the total energy consumption of the machine. The work presents the most significant results of the obtained outcomes.