Coupled Temperature Displacement Model to Predict Residual Stresses in Milling Process

International Conference on Materials, Alloys and Experimental Mechanics 2017

材料科学;金属学;机械制造

Pramod, Monangi^1 ; Reddy, Narahari Varun^1 ; Talluru, Viswajit^1 ; Reddy, Yarkareddy Gopi^1 ; Prakash Marimuthu, K.^1

Department of Mechanical Engineering, Amrita School of Engineering, Amrita Vishwa Vidyapeetham, Amrita University, Bengaluru, India^1

关键词: Displacement analysis;    Displacement model;    Extreme plastic deformations;    Functional performance;    Milling operation;    Surface residual stress;    Von Mises stress;    X-ray diffraction method;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/225/1/012026/pdf
DOI  :  10.1088/1757-899X/225/1/012026

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Materials when subjected to plastic deformations, stresses are induced in the material. The stresses that are induced in the material due to machining is very high due to extreme plastic deformation. The nature and magnitude of the stresses plays a vital role in the functional performance of the components. The stresses can be tensile or compressive. Sometimes the stress are beneficial sometimes it is not. The present work is to develop a 2D coupled temperature displacement analysis to predict the surface residual stresses that are induced due to milling operation. In this work the material considered is AISI 1045 steel and the tool that is used is HSS tool. The finite element model is used to predict the residual stresses and it is compared with the experimental results. The predict results are in agreement with the experimental results. The residual stresses where experimentally determined using X-Ray diffraction method. Finite element method helps us to remove costly experiments and the process is rather quick. Apart from the residual stresses, force, temperature, Von Mises stress can also be obtained from the developed model.