Non Destructive Analysis of Fsw Welds using Ultrasonic Signal Analysis

International Conference on Materials, Alloys and Experimental Mechanics 2017

材料科学;金属学;机械制造

Pavan Kumar, T.^1 ; Prabhakar Reddy, P.^2

Rayalaseema University, Kurnool, India^1

CBIT, Hyderabad, India^2

关键词: Attenuation measurements;    Backscattered signal;    Dissimilar aluminum alloy;    Intermixing process;    Joining techniques;    Measured parameters;    Non-destructive analysis;    Ultrasonic signal processing;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/225/1/012060/pdf
DOI  :  10.1088/1757-899X/225/1/012060

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Friction Stir Welding is an evolving metal joining technique and is mostly used in joining materials which cannot be easily joined by other available welding techniques. It is a technique which can be used for welding dissimilar materials also. The strength of the weld joint is determined by the way in which these material are mixing with each other, since we are not using any filler material for the welding process the intermixing has a significant importance. The complication with the friction stir welding process is that there are many process parameters which effect this intermixing process such as tool geometry, rotating speed of the tool, transverse speed etc., In this study an attempt is made to compare the material flow and weld quality of various weldments by changing the parameters. Ultrasonic signal Analysis is used to characterize the microstructure of the weldments. use of ultrasonic waves is a non destructive, accurate and fast way of characterization of microstructure. In this method the relationship between the ultrasonic measured parameters and microstructures are evaluated using background echo and backscattered signal process techniques. The ultrasonic velocity and attenuation measurements are dependent on the elastic modulus and any change in the microstructure is reflected in the ultrasonic velocity. An insight into material flow is essential to determine the quality of the weld. Hence an attempt is made in this study to know the relationship between tool geometry and the pattern of material flow and resulting weld quality the experiments are conducted to weld dissimilar aluminum alloys and the weldments are characterized using and ultra Sonic signal processing. Characterization is also done using Scanning Electron Microscopy. It is observed that there is a good correlation between the ultrasonic signal processing results and Scanning Electron Microscopy on the observed precipitates. Tensile tests and hardness tests are conducted on the weldments and compared for determining the weld quality.