Automatic Generation Control Study in Two Area Reheat Thermal Power System

International Conference on Materials, Alloys and Experimental Mechanics 2017

材料科学;金属学;机械制造

Pritam, Anita^1 ; Sahu, Sibakanta^2 ; Rout, Sushil Dev^3 ; Ganthia, Sibani^4 ; Ganthia, Bibhu Prasad^5

Department of Mechanical Engineering, BCET, Balasore, Odisha, India^1

Department of Mechanical Engineering, GITA, Bhubaneswar, India^2

Department of Mechanical Engineering, CEB, Bhubaneswar, India^3

Department of Mechanical Engineering, IGIT, Sarang, Dhenkanal, India^4

Department of Electrical Engineering, IGIT, Sarang, Dhenkanal, India^5

关键词: Automatic generation control;    Electric grids;    Industrial pollution;    Living environment;    Permanent damage;    Power System;    System errors;    Thermal power system;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/225/1/012223/pdf
DOI  :  10.1088/1757-899X/225/1/012223

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Due to industrial pollution our living environment destroyed. An electric grid system has may vital equipment like generator, motor, transformers and loads. There is always be an imbalance between sending end and receiving end system which cause system unstable. So this error and fault causing problem should be solved and corrected as soon as possible else it creates faults and system error and fall of efficiency of the whole power system. The main problem developed from this fault is deviation of frequency cause instability to the power system and may cause permanent damage to the system. Therefore this mechanism studied in this paper make the system stable and balance by regulating frequency at both sending and receiving end power system using automatic generation control using various controllers taking a two area reheat thermal power system into account.