Design and Simulation of Control Technique for Permanent Magnet Synchronous Motor Using Space Vector Pulse Width Modulation

4th International Conference on Mechanics and Mechatronics Research

机械制造;无线电电子学

Khan, Mansoor^1 ; Yong, Wang^1 ; Mustafa, Ehtasham^2

School of Automation Science Electrical Engineering, Beihang University, Beijing, China^1

Department of Electrical Engineering, Faculty of Engineering and Technology, Gomal University, Dera Ismail Khan, Pakistan^2

关键词: Control techniques;    Design and simulation;    Mathematical equations;    Permanent Magnet Synchronous Motor;    Power electronics devices;    Space vector pulse width modulation;    Three-phase bridge inverter;    Three-phase voltage source inverters;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/224/1/012042/pdf
DOI  :  10.1088/1757-899X/224/1/012042

来源: IOP

【 摘 要 】

After the rapid advancement in the field of power electronics devices and drives for last few decades, there are different kinds of Pulse Width Modulation techniques which have been brought to the market. The applications ranging from industrial appliances to military equipment including the home appliances. The vey common application for the PWM is three phase voltage source inverter, which is used to convert DC to AC in the homes to supply the power to the house in case electricity failure, usually named as Un-interrupted Power Supply. In this paper Space Vector Pulse Width Modulation techniques is discussed and analysed under the control technique named as Field Oriented Control. The working and implementation of this technique has been studied by implementing on the three phase bridge inverter. The technique is used to control the Permanente Magnet Synchronous Motor. The drive system is successfully implemented in MATLAB/Simulink using the mathematical equation and algorithm to achieve the satisfactory results. PI type of controller is used to tuned ers of the motothe parametr i.e. torque and current.