Twinning and detwinning mechanisms in a BCC Ti Mo-Fe multilayered alloy

38th Risø International Symposium on Materials Science

Gutierrez-Urrutia, I.^1 ; Li, C.-L.^1 ; Emura, S.^1 ; Tsuchiya, K.^1,2

National Institute for Materials Science, Sengen 1-2-1, Ibaraki Tsukuba, Japan^1

Graduate School of Pure and Applied Sciences, University of Tsukuba, Ibaraki, Japan^2

关键词: Dissociation process;    Graded structure;    Grain interiors;    Micro-structural;    Multi-pass hot rollings;    Thermal-annealing;    Twin structure;    Twinning and detwinning;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/219/1/012042/pdf
DOI  :  10.1088/1757-899X/219/1/012042

来源: IOP

【 摘 要 】

We have investigated {332} twinning and detwinning mechanisms in a multilayered Ti-10Mo-xFe (x =1-3) alloy fabricated by multi-pass hot rolling. A strong influence of the Fe-graded structure on both phenomena is observed. The propagation of twins that are nucleated in Fe-lean regions (∼1 wt.% Fe) is interrupted in the grain interiors at about 2 wt% Fe. We ascribe this effect to the role of the Fe content on the stress for twin propagation. The unusual twin structure determines the subsequent detwinning process upon thermal annealing. This process consists of two independent detwinning events that occur at two different microstructural regions, namely at twin tips located at grain interiors and at grain boundaries. Both detwinning modes can be explained from a thermodynamic standpoint whereby the boundary dissociation processes minimize the boundary free energy.