Hazard Identification and Risk Assessment of Health and Safety Approach JSA (Job Safety Analysis) in Plantation Company

5th International Conference on Manufacturing, Optimization, Industrial and Material Engineering

Sugarindra, Muchamad^1 ; Suryoputro, Muhammad Ragil^1 ; Novitasari, Adi Tiya^1

Department of Industrial Engineering, Faculty of Industrial Technology, Universitas Islam Indonesia, Km 14.5 Jalan Kaliurang Sleman, Yogyakarta

55184, Indonesia^1

关键词: Direct observations;    Forklift operators;    Hazard and risk assessments;    Hazard identification;    Health and safety;    Job safety analysis;    Personal protective equipment;    Workplace accidents;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/215/1/012029/pdf
DOI  :  10.1088/1757-899X/215/1/012029

来源: IOP

【 摘 要 】

Plantation company needed to identify hazard and perform risk assessment as an Identification of Hazard and Risk Assessment Crime and Safety which was approached by using JSA (Job Safety Analysis). The identification was aimed to identify the potential hazards that might be the risk of workplace accidents so that preventive action could be taken to minimize the accidents. The data was collected by direct observation to the workers concerned and the results were recorded on a Job Safety Analysis form. The data were as forklift operator, macerator worker, worker's creeper, shredder worker, workers' workshop, mechanical line worker, trolley cleaning workers and workers' crepe decline. The result showed that shredder worker value was 30 and had the working level with extreme risk with the risk value range was above 20. So to minimize the accidents could provide Personal Protective Equipment (PPE) which were appropriate, information about health and safety, the company should have watched the activities of workers, and rewards for the workers who obey the rules that applied in the plantation.