Selection of the battery pack parameters for an electric vehicle based on performance requirements

International Conference on Aerospace, Mechanical and Mechatronic Engineering

航空航天工程;机械制造;无线电电子学

Koniak, M.^1 ; Czerepicki, A.^1

Warsaw University of Technology, Faculty of Transport, Koszykowa str. 75, Warsaw, Poland^1

关键词: Depth of discharges;    Estimated lifetime;    Operating characteristics;    Operating parameters;    Operation currents;    Parameters selection;    Performance characteristics;    Performance requirements;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/211/1/012005/pdf
DOI  :  10.1088/1757-899X/211/1/012005

学科分类：航空航天科学

来源: IOP

【 摘 要 】

Each type of vehicle has specific power requirements. Some require a rapid charging, other make long distances between charges, but a common feature is the longest battery life time. Additionally, the battery is influenced by factors such as temperature, depth of discharge and the operation current. The article contain the parameters of chemical cells that should be taken into account during the design of the battery for a specific application. This is particularly important because the batteries are not properly matched and can wear prematurely and cause an additional costs. The method of selecting the correct cell type should take previously discussed features and operating characteristics of the vehicle into account. The authors present methods of obtaining such characteristics along with their assessment and examples. Also there has been described an example of the battery parameters selection based on design assumptions of the vehicle and the expected performance characteristics. Selecting proper battery operating parameters is important due to its impact on the economic result of investments in electric vehicles. For example, for some Li-Ion technologies, the earlier worn out of batteries in a fleet of cruise boats or buses having estimated lifetime of 10 years is not acceptable, because this will cause substantial financial losses for the owner of the rolling stock. The presented method of choosing the right cell technology in the selected application, can be the basis for making the decision on future battery technical parameters.