The application of CAD, CAE & CAM in development of butterfly valve's disc

International Technical Postgraduate Conference

Razif Shah Ranjit, Muhammad Asiff^1 ; Abdullah, Nazlin Hanie^1

Division of Mechanical Engineering, Department of Engineering, Faculty of Engineering and Life Sciences, Universiti Selangor, Bestari Jaya, Selangor

45600, Malaysia^1

关键词: Cavitation damage;    Cavitation indices;    Comparison analysis;    Computational fluid flow;    Downstream pressure;    Improved designs;    Structure analysis;    Upstream pressure;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/210/1/012070/pdf
DOI  :  10.1088/1757-899X/210/1/012070

来源: IOP

【 摘 要 】

The improved design of a butterfly valve disc is based on the concept of sandwich theory. Butterfly valves are mostly used in various industries such as oil and gas plant. The primary failure modes for valves are indented disc, keyways and shaft failure and the cavitation damage. Emphasis on the application of CAD, a new model of the butterfly valve's disc structure was designed. The structure analysis was analysed using the finite element analysis. Butterfly valve performance factors can be obtained is by using Computational Fluid Dynamics (CFD) software to simulate the physics of fluid flow in a piping system around a butterfly valve. A comparison analysis was done using the finite element to justify the performance of the structure. The second application of CAE is the computational fluid flow analysis. The upstream pressure and the downstream pressure was analysed to calculate the cavitation index and determine the performance throughout each opening position of the valve. The CAM process was done using 3D printer to produce a prototype and analysed the structure in form of prototype. The structure was downscale fabricated based on the model designed initially through the application of CAD. This study is utilized the application of CAD, CAE and CAM for a better improvement of the butterfly valve's disc components.