Designing and Implementation a Lab Testing Method for Power Cables Insulation Resistance According with STAS 10411-89, SR EN ISO/CEI/17025/2005

International Conference on Innovative Research - ICIR Euroinvent 2017

Dobra, R.^1 ; Pasculescu, D.^2 ; Marc, G.^1 ; Risteiu, M.^1 ; Antonov, A.^3

Department of Computer Science, 1 Decembrie 1918 University Alba-Iulia, Gabriel Bethlen Str., No. 5, Alba Iulia

510009, Romania^1

Department of Computers and Power Engineering, University of Petrosani, 20 Universitatii str, Petrosani, Romania^2

Electrical and Mechanical Risks Laboratory, National Research and Development Institute for Labor Protection Alexandru Darabont, Blvd. Ghencea no. 35A, district 6, Bucharest, Romania^3

关键词: Electric shock;    Electrical cables;    Electrical safety;    Insulation resistance;    Microcontroller systems;    Normal operating conditions;    Power cables;    SCADA softwares;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/209/1/012069/pdf
DOI  :  10.1088/1757-899X/209/1/012069

来源: IOP

【 摘 要 】

Insulation resistance measurement is one of the most important tests required by standards and regulations in terms of electrical safety. Why these tests are is to prevent possible accidents caused by electric shock, damage to equipment or outbreak of fire in normal operating conditions of electrical cables. The insulation resistance experiment refers to the testing of electrical cable insulation, which has a measured resistance that must be below the imposed regulations. Using a microcontroller system data regarding the insulation resistance of the power cables is acquired and with SCADA software the test results are displayed.