A study of palm biomass processing strategy in Sarawak

29th Symposium of Malaysian Chemical Engineers 2016

Lee, S.J.Y.^1 ; Ng, W.P.Q.^1 ; Law, K.H.^2

Department of Chemical Engineering, Curtin University Malaysia, CDT 250, Sarawak, Miri

98009, Malaysia^1

Department of Electrical and Computer Engineering, Curtin University Malaysia, CDT 250, Sarawak, Miri

98009, Malaysia^2

关键词: Biomass processing;    Centralized processing;    Commercial technology;    Economic potentials;    Environmental concerns;    Mathematical optimization techniques;    Renewable energy source;    Value added products;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/206/1/012062/pdf
DOI  :  10.1088/1757-899X/206/1/012062

来源: IOP

【 摘 要 】

In the past decades, palm industry is booming due to its profitable nature. An environmental concern regarding on the palm industry is the enormous amount of waste produced from palm industry. The waste produced or palm biomass is one significant renewable energy source and raw material for value-added products like fiber mats, activated carbon, dried fiber, bio-fertilizer and et cetera in Malaysia. There is a need to establish the palm biomass industry for the recovery of palm biomass for efficient utilization and waste reduction. The development of the industry is strongly depending on the two reasons, the availability and supply consistency of palm biomass as well as the availability of palm biomass processing facilities. In Malaysia, the development of palm biomass industry is lagging due to the lack of mature commercial technology and difficult logistic planning as a result of scattered locality of palm oil mill, where palm biomass is generated. Two main studies have been carried out in this research work: i) industrial study of the feasibility of decentralized and centralized palm biomass processing in Sarawak and ii) development of a systematic and optimized palm biomass processing planning for the development of palm biomass industry in Sarawak, Malaysia. Mathematical optimization technique is used in this work to model the above case scenario for biomass processing to achieve maximum economic potential and resource feasibility. An industrial study of palm biomass processing strategy in Sarawak has been carried out to evaluate the optimality of centralized processing and decentralize processing of the local biomass industry. An optimal biomass processing strategy is achieved.