Recovery Of Chromium Metal (VI) Using Supported Liquid Membrane (SLM) Method, A study of Influence of NaCl and pH in Receiving Phase on Transport

2nd International Conference on Materials Engineering and Nanotechnology

材料科学;物理学

Djunaidi, Muhammad Cholid^1 ; Lusiana, Retno A.^1 ; Rahayu, Maya D.^1

Chemistry Departement, Diponegoro University, Indonesia^1

关键词: Aliquat-336;    Atomic absorption spectrophotometry;    Chromium metals;    pH variation;    Polytetrafluoroethylene (PTFE);    Supported liquid membrane;    Supported membrane;    Valuable metals;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/205/1/012010/pdf
DOI  :  10.1088/1757-899X/205/1/012010

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Chromium metal(VI) is a valuable metal but in contrary has high toxicity, so the separation and recovery from waste are very important. One method that can be used for the separation and recovery of chromium (VI) is a Supported Liquid Membrane (SLM). SLM system contains of three main components: a supporting membrane, organic solvents and carrier compounds. The supported Membrane used in this research is Polytetrafluoroethylene (PTFE), organic solvent is kerosene, and the carrier compound used is aliquat 336. The supported liquid membrane is placed between two phases, namely, feed phase as the source of analyte (Cr(VI)) and the receiving phase as the result of separation. Feed phase is the electroplating waste which contains of chromium metal with pH variation about 4, 6 and 9. Whereas the receiving phase are the solution of HCl, NaOH, HCl-NaCl and NaOH-NaCl with pH variation about 1, 3, 5 and 7. The efficiency separation is determined by measurement of chromium in the feed and the receiving phase using AAS (Atomic Absorption Spectrophotometry). The experiment results show that transport of Chrom (VI) by Supported Liquid membrane (SLM) is influenced by pH solution in feed phase and receiving phase as well as NaCl in receiving phase. The highest chromium metal is transported from feed phase about 97,78%, whereas in receiving phase shows about 58,09%. The highest chromium metal transport happens on pH 6 in feed phase, pH 7 in receiving phase with the mixture of NaOH and NaCl using carrier compound aliquat 336.