Factors Influence the Structural and Magnetic Properties of Ag-Fe3O4 Nanocomposites Synthesized by Reduction Method

4th International Conference on Advanced Materials Science and Technology

Fajaroh, F.^1 ; Nazriati^1

Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Negeri Malang, State University of Malang, Jl. Semarang 5, Malang

65145, Indonesia^1

关键词: Crystallinities;    Electrochemical synthesis;    Fe3O4;    Heterogeneous catalyst;    Optimum concentration;    Reduction method;    Structural and magnetic properties;    Synthesis parameters;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/202/1/012064/pdf
DOI  :  10.1088/1757-899X/202/1/012064

来源: IOP

【 摘 要 】

Silver nanoparticles integrated with a magnetic matrix such as Fe3O4to form Ag-Fe3O4nanocomposites show some advantages in their applications as an antibacterial agent and heterogeneous catalyst. This material can be synthesized by a combination of electrochemical and reduction methods supported by ultrasonic route. The purposes of this study are to synthesize the nanocomposites by reduction method and to study the effect of synthesis parameters on the structural and magnetic properties of the generated nanocomposites. This research consisted of three main stages. The first step was the electrochemical synthesis of magnetite nanoparticles using electro-oxidation of iron in water. Second, adsorption of Ag+on the surface of Fe3O4carried out by sonication of a mixture of AgNO3solution and powder of Fe3O4nanoparticles. The third stage was the reduction of Ag+to Ag0with glucose as reductant and NaOH as an accelerator, where it was conducted under a variation of AgNO3mole ratios to glucose and NaOH concentration. The characterizations of Ag-Fe3O4nanocomposites were performed using XRD and VSM. The results of the characterizations showed that Ag-Fe3O4nanocomposites have been successfully synthesized. There was an optimum concentration of NaOH at pH (11) and mole ratio of AgNO3to glucose (1 : 8) in the synthesis process producing the composite with the highest crystallinity.