Fault Characteristics of Full Power Inverted Source Considering Low-voltage Ride Through Control Strategy

2017 2nd Asia Conference on Power and Electrical Engineering

能源学;电工学

Zhang, Chi^1 ; Zeng, Jie^1 ; Zhao, Wei^1 ; Zhong, Guobin^1 ; Xu, Qi^1 ; Luo, Pandian^1 ; Li, Weiren^2 ; Liu, Bohan^3

Electric Power Research Institute of Guangdong Power Grid Co. Ltd., Guangzhou

510080, China^1

State Key Laboratory of New Energy Power System(NCEPU), Beijing Chanping

102206, China^2

State Grid AC Project Construction Co. Ltd, Beijing, China^3

关键词: Active power generation;    Current control loop;    Fault characteristics;    Low-voltage ride-through;    New energy sources;    Reference values;    Steady-state currents;    Whole process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/199/1/012138/pdf
DOI  :  10.1088/1757-899X/199/1/012138

来源: IOP

【 摘 要 】

New energy source is thriving in China. However, the fault characteristics of grids have been altered significantly with the penetration of new energy source increasing. In conventional researches, the fault features of wind farms were discussed briefly or simply overlooked. This paper began with the theoretical analysis of control system of full power inverted (FPI) sources and indicated that the response time of current control loop is 8.5 ms, while the steady state current of FPI source is controlled by reference values and set value of current limiter; the expressions of steady state current of FPI source were presented then. In addition, main factors affecting fault current, including different active power generation before fault, different fault locations and different fault types, were analyzed comprehensively and compared through simulation to gain a clear insight into the whole process of faults. The research is helpful to obtain a better understanding of new energy source.