Inertia Identification and PI Parameter Tuning of PMSM Servo Drives

2017 2nd Asia Conference on Power and Electrical Engineering

能源学;电工学

Lei, Huang^1

Tianjin Key Laboratory of Information Sensing and Intelligent Control, School of Automation and Electrical Engineering, Tianjin University of Technology and Education, Tianjin, China^1

关键词: Dynamic performance;    Identification scheme;    Inertia identification;    Inertia parameters;    Numerical calculation;    Parameter-tuning;    Permanent Magnet Synchronous Motor;    Speed accelerations;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/199/1/012117/pdf
DOI  :  10.1088/1757-899X/199/1/012117

来源: IOP

【 摘 要 】

The goal of this paper is to improve the performance of permanent magnet synchronous motor(PMSM) servo system by identification of the inertia parameter and auto-tuning of PI parameters. The method relies on the speed acceleration and deceleration response produced by speed ramp signals applied to a speed-controlled servo. The proposed method relies on simple numerical calculations, thus make the proposed scheme more practical. After the knowledge of the inertia parameter, the tuning of the speed control loop can be performed. The experimental results verified that the proposed identification scheme can estimate inertia parameters accurately and effectively and the control system tuned can achieve good dynamic performance.