Design, Static Analysis And Fabrication Of Composite Joints

Frontiers in Automobile and Mechanical Engineering

Mathiselvan, G.^1 ; Gobinath, R.^1 ; Yuvaraja, S.^1 ; Raja, T.^1

Department of Automobile Engineering, Sathyabama University, Chennai, India^1

关键词: Adhesive thickness;    Aircraft applications;    ANSYS software;    Composite joint;    Composite technology;    Mechanical fastener;    Overlap length;    Parametric study;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/197/1/012007/pdf
DOI  :  10.1088/1757-899X/197/1/012007

来源: IOP

【 摘 要 】

The Bonded joints will be having one of the important issues in the composite technology is the repairing of aging in aircraft applications. In these applications and also for joining various composite material parts together, the composite materials fastened together either using adhesives or mechanical fasteners. In this paper, we have carried out design, static analysis of 3-D models and fabrication of the composite joints (bonded, riveted and hybrid). The 3-D model of the composite structure will be fabricated by using the materials such as epoxy resin, glass fibre material and aluminium rivet for preparing the joints. The static analysis was carried out with different joint by using ANSYS software. After fabrication, parametric study was also conducted to compare the performance of the hybrid joint with varying adherent width, adhesive thickness and overlap length. Different joint and its materials tensile test result have compared.