Tribological and Geometrical Analysis of the Friction Forces of Continuous Severe Plastic Deformation

7th International Conference on Nanomaterials by Severe Plastic Deformation

Doni, T.^1 ; Hadzima, B.^1 ; Raab, G.^2

Research Centre of University of ilina, University of ilina, ilina, Slovakia^1

Institute for Physics of Advanced Materials, Ufa State Aviation Technical University, Ufa, Russia^2

关键词: Analytical procedure;    Conventional rolling;    Equal channel angular rollings;    Fine grain structure;    Geometrical analysis;    Severe plastic deformation process;    Severe plastic deformations;    Technical requirement;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/194/1/012006/pdf
DOI  :  10.1088/1757-899X/194/1/012006

来源: IOP

【 摘 要 】

Equal Channel Angular Rolling (ECAR), a severe plastic deformation process, is suitable for the shear deforming a long and thin sheet continuously. An interesting issue is that thickness of a sheet is not reduced during ECAR. Although the shear texture and fine grain structure are easily obtained by ECAR, yet the ECAR process's difficulties in terms of technical control, such as surface defect, low ductility and low processing speed, still remain. The surface defects and processing speed are partially improved by applying a series deformation of rolling and ECAR. The article presents methodological and analytical procedures, adaptation of a conventional rolling mill Duo-system for processes of a SPD-representative which are represented by the method ECAR. They specify in detail the technical requirements whose new design solutions should be implemented. They present in detail the mechanical load drive shafts, as well as the calculation of compression forces with consideration of the friction forces. The geometric analyses of localisation positions of the outlet channel in terms of size and orientation of the dominant shear plane are also presented.