Thermal analysis on Al7075/Al2O3 metal matrix composites fabricated by stir casting process

International Conference on Emerging Trends in Engineering Research

工业技术;材料科学

Jacob, S.^1 ; Shajin, S.^2 ; Gnanavel, C.^3

Department of Automobile Engineering, Vels University Chennai, Tamilnadu, India^1

Department of Mechanical Engineering, Narayanaguru Siddhartha College of Engineering, Athencode

Tamilnadu, India^2

Department of Mechanical Engineering, Vels University, Chennai, Tamilnadu, India^3

关键词: Aluminium metal matrix composites;    Cast composites;    Ceramic particle;    Conventional materials;    Defect-free microstructures;    High temperature resistance;    Renewable energies;    Stir casting method;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/183/1/012010/pdf
DOI  :  10.1088/1757-899X/183/1/012010

来源: IOP

【 摘 要 】

Metal matrix Composites (MMC's) have evoked a keen interest in recent times for various applications in aerospace, renewable energy and automotive industries due to their superior strength, low cost, easy availability and high temperature resistance [1]. The crack and propagation occurs in conventional materials without any appreciable indication in a short span. Hence composite materials are preferred nowadays to overcome this problem [2]. The process of metal matrix composites (MMC's) is to unite the enviable attributes of metals and ceramics. The Stir casting method is used for producing aluminium metal matrix composites (AMC's). A key challenge of the process is to spread the ceramic particles to achieve a defect free microstructure [2]. By carefully selecting stir casting processing specification, such as stirring time, temperature of the melt and blade angle, the desired microstructure can be obtained. The focus of this work is to develop a high strength particulate strengthen aluminium metal matrix composites, and Al7075 was selected which can offer high strength without much disturbing ductility of metal matrix [4]. The composites will be examined using standard metallurgical and mechanical tests. The cast composites are analysed to Laser flash analysis (LFA) to determine Thermal conductivity [5]. Also changes in microstructure are determined by using SEM analysis.