Comparative Investigation on Modal analysis of LM25 Aluminium alloy with other Aluminim alloys using Finite element analysis software

International Conference on Emerging Trends in Engineering Research

工业技术;材料科学

Arunkumar, S.^1 ; Baskaralal, V.P.M.^1 ; Muthuraman, V.^1

Department of Mechanical Engineering, Vels University, Chennai

600117, India^1

关键词: Analysis and simulation;    Block Lanczos method;    Direct solvers;    FEA software;    Finite element analysis software;    Graphical environments;    Mode shapes;    Model and analysis;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/183/1/012011/pdf
DOI  :  10.1088/1757-899X/183/1/012011

来源: IOP

【 摘 要 】

The rudimentary steps of the modal analysis and simulation are carried out. The modal analysis is carried out on the different Aluminum Alloys cantilever beam. The cantilever beam is designed in the graphical environment of the ANSYS. The cantilever beam was fine-tuned on one end with all degree of liberation on this end were taken, beam cannot move and rotate. Mode shapes and natural frequencies are premeditated in platforms ANSYS with arithmetical formulation of the direct solver including the block Lanczos method. Aluminum alloys are widely utilized in much application due to their estimable weight to vigor property. Many examination works have been distributed out to make developments the mechanical properties of aluminum alloys. The composition of alloying elements plays a consequential role in deciding the properties of an alloy. In this study a numerical analysis implement i.e., finite element analysis (FEA) is utilized. The work obtainable in this paper is aimed at the study of effect of modal analysis of different aluminum alloys. The modeling and analysis is carried out utilizing ANSYS FEA software. A modal analysis is carried out to understand the modes of frequency demeanor of the material considered. The modal analysis play a vital role in the design of components subjected to high vibration.