Investigation of the effect of contaminations and cleaning processes on the surface properties of brazing surfaces

19th Chemnitz Seminar on Materials Engineering – 19. Werkstofftechnisches Kolloquium

Bobzin, K.^1 ; Öte, M.^1 ; Wiesner, S.^1

Surface Engineering Institute, RWTH Aachen University, Aachen, Germany^1

关键词: Cleaning methods;    Cleaning process;    Cooling lubricants;    Faying surface;    Inconel alloy 625;    Molten filler;    Plasma cleaning;    Testing fluids;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/181/1/012027/pdf
DOI  :  10.1088/1757-899X/181/1/012027

来源: IOP

【 摘 要 】

The quality of brazed joints is determined by different factors such as the atmosphere and the parameters during brazing as well as the condition of the brazing surfaces. Residues of lubricants used during machining of the components and the subsequent cleaning processes can contaminate the faying surfaces and can hence influence the flow ability of the molten filler metals. Besides their influence on the filler metal flow, the residues can result in the formation of carbonic phases in the joint leading to a possible reduction of the corrosion resistance and the mechanical properties. The first step of the current study with the aim of avoiding these defects is to identify the influence of critical contaminations and cleaning methods on the quality of the brazed joints. In a first step, contaminations on AISI304 and Inconel alloy 625 due to different cooling lubricants and the effect of several cleaning methods, in particular plasma cleaning, have been investigated. Information about the surface energy of contaminated and cleaned surfaces was gained by measuring contact angle of testing fluids. Additionally, the lubricants and the resulting contamination products have been analyzed considering the influence of a heat treatment.