Self-sharpening-effect of nickel-diamond coatings sprayed by HVOF

19th Chemnitz Seminar on Materials Engineering – 19. Werkstofftechnisches Kolloquium

Tillmann, W.^1 ; Brinkhoff, A.^1 ; Schaak, C.^1 ; Zajaczkowski, J.^1

Institute of Materials Engineering, TU Dortmund, Dortmund, Germany^1

关键词: Ball-on-disc tests;    Gain information;    High velocity oxygen fuels;    Manufacturing cost;    Production methods;    Thermal influence;    Thermal sensitivity;    Thermal spray process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/181/1/012016/pdf
DOI  :  10.1088/1757-899X/181/1/012016

来源: IOP

【 摘 要 】

The durability of stone working and drilling tools is an increasingly significant requirement in industrial applications. These tools are mainly produced by brazing diamond metal matrix composites inserts to the tool body. These inserts are produced by sintering diamonds and metal powder (e.g. nickel). If the wear is too high, the diamonds will break out of the metal matrix and other diamonds will be uncovered. This effect is called self-sharpening. But diamonds are difficult to handle because of their thermal sensitivity. Due to their high thermal influence, manufacturing costs, and complicate route of manufacturing (first sintering, then brazing), there is a great need for alternative production methods for such tools. One alternative to produce wear-resistant and self-sharpening coatings are thermal spray processes as examined in this paper. An advantage of thermal spray processes is their smaller thermal influence on the diamond, due to the short dwelling time in the flame. To reduce the thermal influence during spraying, nickel coated diamonds were used in the HVOF-process (high velocity oxygen fuel process). The wear resistance was subsequently investigated by means of a standardized ball-on-disc test. Furthermore, a SEM (scanning electron microscope) was used to gain information about the wear-mechanism and the self-sharpening effect of the coating.