Mini-tensile specimen application for sheets characterization

4th International Conference Recent Trends in Structural Materials

Dugan, J.^1 ; Rund, M.^1 ; Prantl, A.^1 ; Konopík, P.^1

COMTES FHT Inc., Prmyslová 995, Dobany

334 41, Czech Republic^1

关键词: Bulk materials;    Constant strain rate;    Digital image correlations;    Experimental materials;    Standard size;    Strain-rate hardening;    Tensile specimens;    Testing procedure;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/179/1/012020/pdf
DOI  :  10.1088/1757-899X/179/1/012020

来源: IOP

【 摘 要 】

There are many cases when there is a shortage of the experimental material for detailed analysis and then small size specimens techniques becomes essential. The current paper deals with investigations of mini-tensile tests (MTT) application to metal sheets characterization. In the case of metal sheets assessment the most common are tensile tests for Lankford parameters and strain hardening determination. As most of the processes are not quasi-static and constant strain rate processes, thus assessment of strain rate hardening is also crucial part of the characterization. Previously developed and verified testing procedure of M-TTs for bulk materials is applied here for steel sheet made of DC01 characterization. Tests under quasi-static and dynamic loading conditions are carried out in order to describe above mentioned properties at room temperature. Accurate strain measurement is carried out with digital image correlation systems and results obtained with M-TTs are going to be confronted with standard size specimens' results.