The effect of the material surface oxidation on laser light absorption

4th International Conference Recent Trends in Structural Materials

Hruka, M.^1 ; Tesa, J.^1 ; Vosták, M.^1 ; Smazalová, E.^1

University of West Bohemia, Pilsen, EU, Czech Republic^1

关键词: Emissivity values;    Hardness depth profiles;    High power diode laser;    Laser light absorption;    Solid state pulsed lasers;    Surface conditions;    Surface hardness;    Surface temperatures;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/179/1/012029/pdf
DOI  :  10.1088/1757-899X/179/1/012029

来源: IOP

【 摘 要 】

This study examines the influence of surface condition on its interaction with a laser beam. The relation was tested on milled C45 steel samples with a different width of created oxide layer. The milled surface with roughness 1.6 was modified by the creation of oxide layer. The oxide layers were created by solid state pulsed laser with scanning optics. The modified samples were processed by high power diode laser with a wide spread beam. The surface temperature was measured by the thermal camera during this process. The surface hardness and hardness depth profile were measured for all modified samples and the emissivity values were measured. The effect of pretreatment on hardness and microstructure will be discussed. The goal of this paper is to describe the relation between the parameters of created oxide layer and its effect on laser beam absorption.