Ion-Selective Deposition of Manganese Sulphate Solution from Trenggalek Manganese Ore by Active Carbon and Sodium Hydroxide

International Conference on Advanced Materials for Better Future 2016

Andriyah, L.^1 ; Sulistiyono, E.^1

Research Center of Metallurgy and Materials, LIPI, Puspiptek Gedung

470, Indonesia^1

关键词: Activated carbon adsorption;    Adsorption process;    Cath-ode materials;    Hydrometallurgical process;    Manufacturing process;    Purification process;    Selective deposition;    Sulphate solutions;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/176/1/012038/pdf
DOI  :  10.1088/1757-899X/176/1/012038

来源: IOP

【 摘 要 】

One of the step in manganese dioxide manufacturing process for battery industry is a purification process of lithium manganese sulphate solution. The elimination of impurities such as iron removal is important in hydrometallurgical processes. Therefore, this paper present the purification results of manganese sulphate solution by removing impurities using a selective deposition method, namely activated carbon adsorption and NaOH. The experimental results showed that the optimum condition of adsorption process occurs on the addition of 5 g adsorbent and the addition of 10 ml NaOH 1 N, processing time of 30 minutes and the best is the activated carbon adsorption of Japan. Because the absolute requirement of the cathode material of lithium ion manganese are free of titanium then of local wood charcoal is good enough in terms of eliminating ions Ti is equal to 70.88%.