Assessing the durability of North Buton Asphalt seal with Polymer Modified and Rejuvenation in warm mixture design

International Conference on Advanced Materials for Better Future 2016

Zalman^1 ; Yulianto, B.^1 ; Setyawan, A.^2

Magister Maintenance and Rehabilitation of Infrastructure, Sebelas Maret University, Jl. Ir. Sutami 36 A, Solo

57126, Indonesia^1

Roadmate Research Group, Civil Engineering Department, Sebelas Maret University, Jl. Ir. Sutami 36 A, Solo

57126, Indonesia^2

关键词: Characteristic properties;    Elastomeric polymer;    General specification;    Material specification;    Mixing temperature;    Modified asphalts;    Physical conditions;    Quality performance;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/176/1/012034/pdf
DOI  :  10.1088/1757-899X/176/1/012034

来源: IOP

【 摘 要 】

Utilization of Buton Asphalt has been expanded with various optimizations through modification of the base material so that it can be used either as an additive in granular form or as modified asphalt. While in North Buton using Asphalt Buton that uses a special material specification Buton Asphalt cold mixture of Butur Seal, a thin layer of Buton Asphalt B 50/30 above the base course or existing asphalt pavement layer, which has been prepared in accordance with the General Specifications. Technically utilization of Butur Seal is still very sensitive to human resource capacity in understanding the physical condition of Asbuton, and severely affects construction to failure. Buton asphalt cold mix in the field also showed some kind of damage caused by difficulties or not fitting rejuvenation materials used. Making the challenge to do research on the characteristic properties of Asphalt Buton B50 / 30 with modifications, to get Asbuton that has higher durability in use in the field. Quality performance of the Asbuton cold mixtures is observed through a series of tests in the laboratory. This test includes testing the stability and the compressive test. Tests conducted in the laboratory are expected to be directly applicable as it is done in the field. This research aimed to investigate the characteristics of Butur Seal in warm mixture that can be used in the construction and maintenance of roads in North Burton and to investigate the characteristics of Butur Seal with the addition of elastomeric polymers and rejuvenation materials in warm mixing temperature of 30, 40, 60 and 80° C.