Investigation of thermal properties of raw materials of asphalt mixtures

4th International Conference on Competitive Materials and Technology Processes

Géber, R.^1 ; Simon, A.^1 ; Kocserha, I.^1

University of Miskolc, Institute of Ceramics and Polymer Engineering, Hungary^1

关键词: Binding process;    Different grades;    Elevated temperature;    High temperature;    Mineral aggregate;    Mineral materials;    Mixing process;    Temperature range;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/175/1/012047/pdf
DOI  :  10.1088/1757-899X/175/1/012047

来源: IOP

【 摘 要 】

Asphalt mixtures are composite materials, which are made of different grades of mineral aggregates and bitumen. During the mixing process mineral materials were blended with bitumen at relatively high temperature (∼200 °C). As the binding process come off in these higher temperature range, thermal properties of asphaltic materials are important. The aim of this project is to reveal the thermal properties of raw materials. During our research two types of mineral aggregates were tested (limestone and dolomite) by different methods. Differential thermal analysis, thermal expansion and thermal conductivity were investigated at technologically important temperatures. The results showed that the structure of mineral materials did not change at elevated temperatures, expansion of samples was neglible, while thermal conductivity changed by temperature.