Analysis of progressive cavity pumps specific wear processes using Finnie models

13th International Conference on Tribology

Popescu, M.^1 ; Popovici, A.I.^2 ; Petrescu, F.N.^2 ; Antonescu, N.N.^1

Petroleum-Gas University of Ploiesti, Blvd. Bucureti no. 39, Ploiesti

100680, Romania^1

Department of Mechanical Technology, Technical University of Civil Engineering Bucharest, 59 Plevnei Way, Bucharest

010223, Romania^2

关键词: Aggressive environment;    Direct contact;    Erosion wear;    Erosive wear;    Progressive cavity pumps;    Relative motion;    Rotor-stator coupling;    Wear process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/174/1/012020/pdf
DOI  :  10.1088/1757-899X/174/1/012020

来源: IOP

【 摘 要 】

Progressive cavitation pumps are designed to work in aggressive environments thus their wear is inevitable. The specific tribological coupling of these pumps is composed of a helical rotor with a single outward helix and a stator with a double inside helix. These elements are in relative motion and direct contact to each other and also in direct contact with the pumped oil. Therefore the main forms of wear of rotor-stator coupling elements are the abrasive wear and the erosion wear. In this paper is presented the analysis of erosion with Finnie models. The results are useful for estimation of progressive cavity pumps specific abrasive-erosive wear.