Complex of automated equipment and technologies for waveguides soldering using induction heating

5th International Workshop on Mathematical Models and their Applications 2016

Murygin, A.V.^1 ; Tynchenko, V.S.^1 ; Laptenok, V.D.^1 ; Emilova, O.A.^1 ; Bocharov, A.N.^1

Reshetnev Siberian State Aerospace University, Krasnoyarsky Rabochy Av. 31, Krasnoyarsk

660037, Russia^1

关键词: Automated equipment;    Designing complex;    Effective management;    Heating technology;    Quality of product;    Soldering process;    System of automatic controls;    Waveguide systems;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/173/1/012023/pdf
DOI  :  10.1088/1757-899X/173/1/012023

来源: IOP

【 摘 要 】

The article deals with the problem of designing complex automated equipment for soldering waveguides based on induction heating technology. A theoretical analysis of the problem, allowing to form a model of the inductor-waveguide system and to carry out studies to determine the form of inducing wire, creating a narrow and concentrated heat zone in the area of the solder joint. Also solves the problem of the choice of the temperature control means, the information from which is used later to generate the effective management of induction soldering process. Designed hardware complex in conjunction with the developed software system is a system of automatic control, allowing to manage the process of induction heating, to prevent overheating and destruction of the soldered products, improve the stability of induction soldering process, to improve the quality of products, thereby reducing time and material costs for the production.