Modeling of thermal processes in waveguide tracts induction soldering

5th International Workshop on Mathematical Models and their Applications 2016

Murygin, A.V.^1 ; Tynchenko, V.S.^1 ; Laptenok, V.D.^1 ; Emilova, O.A.^1 ; Seregin, Yu N.^1

Reshetnev Siberian State Aerospace University, Krasnoyarsky Rabochy Av. 31, Krasnoyarsk

660037, Russia^1

关键词: Connection element;    Energy distributions;    Information control systems;    Modeling process;    Process parameters;    Soldering process;    Structural assemblies;    Thermodynamics equation;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/173/1/012026/pdf
DOI  :  10.1088/1757-899X/173/1/012026

来源: IOP

【 摘 要 】

The problem solving of the induction heating models development, which describe the heating of the separate structural assembly components of the waveguide path and product generally, is presented in this paper. Proposed mathematical models are based on the thermodynamics equation and on the heat balance law. The system of the heating process mathematical models, such as surge tube and flange heating, and the mathematical model of the energy distribution are presented. During the modeling process with Matlab system by using mathematical models graphs of the tube, flange and coupling heating were obtained. These design charts are confirmed by the results of the experimental study. During the experimental studies pyrometers for temperature control and a video camera for visual control of the process parameters were used. On the basis of obtained models the induction soldering process features analysis is carried out and the need of its automation by the using of the information control systems for thermal management between the connection elements is revealed.