Modeling analysis of temperatures at points in oxide film of grinding wheels

3rd International Conference on Advanced Materials Research and Applications

Zhang, H.L.^1 ; Kuai, J.C.^2

School of Mechanical Engineering, Nantong University, Nantong, China^1

School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, Henan, China^2

关键词: Abrasive grains;    Calculation results;    ELID-grinding;    Grinding points;    Grinding zones;    Model analysis;    Workpiece;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/170/1/012025/pdf
DOI  :  10.1088/1757-899X/170/1/012025

来源: IOP

【 摘 要 】

In this work, a temperature at points model of the abrasive grains in ELID grinding is presented for the analysis of the temperature of single cutting grain between the workpiece and the oxide film on the ELID wheel surface. The corresponding calculation results show that temperature of single grinding point is significantly higher than the average temperature through the grinding zone.