Preliminary Design on Screw Press Model of Palm Oil Extraction Machine

Colloquium of Advanced Mechanics 2016

Firdaus, Muhammad^1 ; Salleh, S.M.^1 ; Nawi, I.^1 ; Ngali, Z.^1 ; Siswanto, W.A.^1 ; Yusup, E.M.^1

Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, Parit Raja, Johor, Batu Pahat, Malaysia^1

关键词: Design properties;    Maintenance cost;    Model development;    Oil extraction;    Preliminary design;    Screw press;    SolidWorks;    Visual inspection;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/165/1/012029/pdf
DOI  :  10.1088/1757-899X/165/1/012029

来源: IOP

【 摘 要 】

The concept of the screw press is to compress the fruit bunch between the main screw and travelling cones to extract the palm oil. Visual inspection, model development and simulation of screw press by using Solidworks 2016 and calculation of design properties were performed to support the investigation. The project aims to analyse different design of screw press which improves in reducing maintenance cost and increasing lifespan. The currently existing of screw press can endure between 500 to 900 hours and requires frequent maintenance. Different configurations have been tried in determination of best design properties in screw press. The results specify that screw press with tapered inner shaft has more total lifespan (hours) compared existing screw press. The selection of the screw press with tapered inner shaft can reduce maintenance cost and increase lifespan of the screw press.