Preliminary Investigation to Determine the Suitable Mixture Composition for Corn Starch Matrix

Colloquium of Advanced Mechanics 2016

Zakaria, Nazri Huzaimi^1 ; Ngali, Zamani^2 ; Selamat, Mohd Zulkefli^1

Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya Durian Tunggal Melaka, Malaysia^1

Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussien Onn, Batu Pahat, Malaysia^2

关键词: Biodegradable composites;    Composition ratio;    Cost of productions;    Fatigue endurances;    Mixture compositions;    Natural fiber composites;    Polymeric composites;    Selection criteria;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/165/1/012013/pdf
DOI  :  10.1088/1757-899X/165/1/012013

来源: IOP

【 摘 要 】

The use of natural fiber as reinforcement in polymeric composites has been seen a dramatically increase over the last decades. The surge in the interest of natural fiber composite or biodegradable composite is mainly due to the attractive cost of production, improved of hardness, better fatigue endurance and good thermal and mechanical resistivity. In this work, corn starch in the form of powder is utilized as the matrix of the composite. However, starch is brittle and has low strength make it inappropriate candidate for matrix binder. The main objective of this study is to modify the mechanical properties of pure corn starch by mixing it with water, glycerol and vinegar. The composition ratio of water is 60∼80%, corn starch 10∼35%, glycerol is 5∼15% and vinegar is 0∼5%, ten samples (A-J) have been manufactured and the best mixture composition is selected based on few selection criteria. The selection criteria are visual impaction, hardness and density. From the results, the samples without vinegar are not suitable to be used because of the fungus availability on the surface. Meanwhile the results from the samples with 5 ml vinegar have no fungus on their surface even has been exposed to the ambient air. While the sample C has shown the best sample based on the visual, hardness and density test.