Computational Modelling and Movement Analysis of Hip Joint with Muscles

Colloquium of Advanced Mechanics 2016

Siswanto, W.A.^1 ; Yoon, C.C.^1 ; Salleh, S. Md.^1 ; Ngali, M.Z.^1 ; Yusup, Eliza M.^1

Department of Engineering Mechanics, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, Malaysia^1

关键词: Computational model;    Computational modelling;    Contact interface;    Maximum displacement;    Movement analysis;    Non-linear solver;    Stress and strain;    Visualization platforms;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/165/1/012030/pdf
DOI  :  10.1088/1757-899X/165/1/012030

来源: IOP

【 摘 要 】

In this study, the model of hip joint and the main muscles are modelled by finite elements. The parts included in the model are hip joint, hemi pelvis, gluteus maximus, quadratus femoris and gamellus inferior. The materials that used in these model are isotropic elastic, Mooney Rivlin and Neo-hookean. The hip resultant force of the normal gait and stair climbing are applied on the model of hip joint. The responses of displacement, stress and strain of the muscles are then recorded. FEBio non-linear solver for biomechanics is employed to conduct the simulation of the model of hip joint with muscles. The contact interfaces that used in this model are sliding contact and tied contact. From the analysis results, the gluteus maximus has the maximum displacement, stress and strain in the stair climbing. Quadratus femoris and gamellus inferior has the maximum displacement and strain in the normal gait however the maximum stress in the stair climbing. Besides that, the computational model of hip joint with muscles is produced for research and investigation platform. The model can be used as a visualization platform of hip joint.